Discover ghd rehab—a range of heat-activated leave-in treatments that effortlessly care for your hair. Designed for use on wet hair, ghd rehab improves the condition of every strand—for flawless results without rinsing or waiting time, with built-in ghd heat protection. This leave-in treatment is your partner for long-lasting nourished, strong (1) and healthy-feeling hair. (2)

ghd rehab fine hair thickener is a leave-in spray that instantly adds body to fine and thin hair. The advanced formula noticeably thickens each strand (3) – for visibly fuller hair with radiant shine. The heat-activated, weightless formula instantly adds body and strength (3) to fine hair – for natural volume. Achieve transformative results on fine or thin hair and experience noticeably thicker (4) hair with a healthy shine. For all-round nourished, healthy-feeling hair.(5)

(1) Consumer test, Sep '23. 78% of 100 women agreed that their hair felt stronger with ghd DHR rehab and 84% agreed that their hair was softer compared to before using rehab and heat styling.
(2) Consumer test, Sep '23. 81% of 114 respondents agree that hair feels healthier with ghd DHN rehab than before heat styling and using rehab.
(3) Compared to naturally dried fine hair. (4) Consumer test, Sep'23. 77% of 97 women agreed that ghd rehab immediately makes hair feel thicker, and 80% agreed that hair immediately feels fuller compared to before using rehab and heat styling. (5) Consumer test, Sep '23. 72% of 97 women agreed that hair feels healthier with ghd rehab than before using rehab and heat styling.

Manufacturer info

GHD DEUTSCHLAND GMBH

info@ghdhair.de
https://www.ghdhair.com/de

Responsible party:

Aqua (Water), PVP, Polysorbate 20, Chitosan, Phenoxyethanol, Parfum (Fragrance), PEG-40 Hydrogenated Castor Oil, Ethylhexylglycerin, PEG-60 Hydrogenated Castor Oil, Polysorbate 80, Formic Acid, Disodium EDTA, Limonene, Linalool, Alpha-Isomethyl Ionone, Hexyl Cinnamal, Citronellol, Coumarin, Citral, Tocopherol.

Step 1: Apply to wet hair: As the cuticle layer is up to 50% open when wet, the product can penetrate deep into the hair and work to its full potential, rather than just coating the surface.

Step 2: Activate the product with heat: Dry and style your hair with ghd tools to liquefy the key ingredients, allowing them to penetrate deep into the hair structure and distribute evenly throughout each strand for sealed-in care and long-lasting results.

For perfect results, combine ghd rehab fine hair thickener with ghd duet blowdry. The 2-in-1 Hair Dryer Brush transforms your hair directly from wet to a blow-dry look and activates the ghd rehab formula with heat.

"important safety instructions To reduce the risk of burns, electrocution, fire, or injury to persons, read and follow these safety instructions before using your ghd styler. This ghd styler is for use only as a hairstyling aid, and only with products specifically designed for use with a heated hairstyling aid such as a ghd heat mat. Handling your ghd styler The ghd styler contains high-tech, sensitive components therefore please ensure that the product is not dropped. Do not insert foreign objects, paint, burn or disassemble your ghd styler. Do not use your ghd styler if it has been damaged – for example if the styler casing is cracked. If your product is damaged through misuse or abuse, this will not be covered under your guarantee. This does not affect your statutory rights. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved, by a person responsible for their safety. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. BURN HAZARD: Keep appliance out of reach from children, particularly during use and during cool down after use. When the appliance is connected to a power supply never leave it unattended. The ghd styler is not suitable for use with synthetic hair. It is possible that colour may permanently transfer onto the styler if used on dyed hair. warning: keep away from water Do not use this device in a bathtub, shower, or water filled reservoir. 1. When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off. 2. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electric circuit supplying the bathroom. Ask your installer, or a qualified electrician, for advice. 3. Do not reach for the for the appliance if it has fallen into water. 4. Do not spray or apply wet styling aids directly onto the ghd styler. warning: electricity As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of electrocution: Never operate this appliance if it is not working properly, or if it has a damaged power cord or plug. If the power cord or plug is damaged, it must be replaced by Jemella Ltd. 1. Only use with 110–240V, 50-60 Hz power supply. 2. The appliance should never be left unattended when plugged in. 3. Keep the power cord away from heated surfaces. Do not wrap the power cord around the appliance. Do not hang the ghd styler by the power cord. 4. Always unplug the ghd styler immediately after using. 5. Do not use an extension power cord with this appliance. 6. Do not use a voltage inverter or generator with this appliance. 7. Your ghd product is a class II electrical appliance and should not be connected to an earth connection. warning: hot surfaces The ghd styler heater plates are hot for effective styling. To reduce the risk of burns: 1. NEVER touch the styler heater plates. 2. Avoid holding or touching the styler beyond the raised finger guard. 3. When not styling always lay the ghd styler on a flat heat-resistant surface such as a ghd styler heat mat. 4. When styling is complete, always switch off the ghd styler and unplug it from the power supply. 5. Wait for the ghd styler to cool before storing. 6. After styling the plates remain hot – for safe cooling cover the plates with the heatproof plate guard. 7. When the ghd styler has cooled, fold the power cord in the same way as it was first delivered in its packaging. Do not wind it around your hand or the body of the ghd styler as this can lead to early failure of the power cord. 8. Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface. Your ghd styler is not only attractive to you, but also to your children. Please ensure you always store your ghd styler out of reach of children, particularly during use, especially when cooling. For safe cooling, cover the plates with the heatproof plate guard. WARNING: even with the plate guard on, the styler heater plates are still very hot, do not touch the plates or allow children or those with reduced physical, sensory or mental capabilities, or lack of experience and knowledge to touch the styler whilst it is cooling. operation Ensure that hair is completely dry before using the ghd appliance. 1. Plug the ghd styler into the power supply. The ghd styler will momentarily flash around the ON/OFF switch and beep to indicate that it is connected to a power supply and is in standby mode. 2. To turn on the ghd styler, press and hold the ON/OFF button for at least 1 second. The ghd styler will play a short start-up tune and a light will pulse to indicate that the styler is heating up. 3. IMPORTANT: the ghd styler reaches the required temperature in seconds, so be careful not to touch the heater plates. Once the ghd styler has reached temperature, it will bleep and the light will remain illuminated to indicate that it is ready to use. 4. When you have finished your styling session, press and hold the ON/OFF button until the ghd styler plays the shut-down tune. Once turned OFF, unplug the ghd styler from the power supply and allow it to cool in a safe place. The ghd styler has the following safety features: 1. Sleep mode: if the ghd styler has been left on and has not been used for more than 30 minutes, a safety feature will automatically turn the styler off. The styler will play the shut-down tune, the heating plates will start to cool and the light will slowly pulse. a. To re-start the ghd styler while it is in sleep mode, simply re-press the ON/OFF button for at least 1 second until the start-up tune sounds. b. Note that although the ghd styler is turned off, it is still connected to the mains and should be unplugged from mains electricity at the earliest opportunity. 2. Protect Mode (ghd Max only): the ghd Max styler can protect itself against adverse events or power fluctuations. For safety the heaters will turn off, the ghd Max styler will emit a bleep and the light will flash white every five seconds. If this occurs un-plug and re-plug at the power supply and then re-start. 3. Fail safe: in the unlikely event of a control system error, for safety the heaters will turn off, the ghd styler will emit rapid bleeps and the light will flash red every 5 seconds. If this occurs switch off the ghd styler at the power supply and re-start. If the unit does not re-start or the problem persists, contact ghd Customer Service for advice. "