• Striped print
• Dishwasher safe
• Silicone seal
• Double-walled vacuum insulation
• For warm and cold beverages
• Suitable for most cup holders
• Flap closure

Manufacturer info

Stanley1913

Frank.Madrigal@stanley1913.com
https://eu.stanley1913.com/de

• Stainless steel
• Silicone

WARNING • Drinking hot liquids too quickly may result in burns and/or injury. • Do not use with carbonated and/or fermenting beverages or foods. Doing so may cause pressure buildup and lead to lid failure and spills or forceful ejection of lid and contents, which can cause burns and/or injury. • Do not overfill with hot liquids. Do not fill beyond 0.25 inches (7 mm) below bottom of threads. This may be marked by a fill line. Overfilling can lead to spills and splashes that may result in burns and/or injury. • Vent after adding hot liquid by opening and reclosing the lid. Failure to do so may cause pressure buildup and lead to lid failure and spills or forceful ejection of lid and contents, which can cause burns and/or injury. • Do not use with dry ice. • Keep out of reach of children. CAUTION • This product is not intended for use with water above 200°F / 93°C. • Do not use in microwave or oven. Doing so will damage the product. • Do not use on stoves or other heating appliances. Doing so will damage the product. • Do not boil the product. Doing so will damage the product. • Do not freeze. Freezing will change performance. • Do not let milk products, formula, or baby food stand in product for an extended period of time. This will minimize bacterial growth. • To be fully leakproof, ensure lid is fully screwed in and/or tightened. If applicable, ensure cap is also closed and latch is secured. For Plastic Components Of This Product: • To slow deterioration, handwashing, avoidance of extended sun exposure, and avoidance of extreme temperatures is recommended. • Brittleness, cracking, stickiness, discoloration, or a powdery surface may indicate deterioration of the materials, if any of these attributes are present use of the product should be discontinued.