Styler ghd mini, s destičkami užšími o 40 %* , je ideální žehličkou pro krátké vlasy a ofinu.
Tento vlasový styler umožňuje precizně upravovat pixie a bob střihy nebo ofiny.
Díky mimořádně úzkým stylingovým deskám lze dosáhnout všestranného stylingu a kreativního vzhledu - s vlasovým stylerem ghd mini totiž bez námahy vytvoříte detailní vlny, lokny nebo hladké účesy. Dosáhněte výsledků jako ze salonu a precizního stylingu od kořínků - dokonce i u velmi krátkých vlasů od délky 2 cm.

Vlasový styler ghd mini je vybaven pokročilou technologií Slimline Dual-Zone, která neustále monitoruje teplo na obou destičkách a udržuje optimální teplotu 185 °C pro hebké, hladké a zdravě vypadající výsledky s leskem vyšším až o 50 %.**

• Zástrčka podle standardů EU
• Technologie Slimline Dual-Zone
• Univerzální napětí
• Doba nahřívání 25 sekund
• Délka kabelu 2,7 m
• Automatický režim spánku po 30 minutách nečinnosti

*v porovnání s ghd gold.
**Technický test v laboratoři na hnědých vlasech, v porovnání s přirozeně usušenými vlasy.

Údaje o výrobci

GHD DEUTSCHLAND GMBH

info@ghdhair.de
https://www.ghdhair.com/de

Odpovědná osoba:

Materialmix

4 kroky k dokonale upraveným vlasům

1. Nastříkejte na vlasy ghd bodyguard Heat Protect Spray.
2. Rozdělte vlasy na jednotlivé části.
   3a) Hladký vzhled: Přiložte styler ke kořínkům a postupujte rovnoměrně po celé délce vlasů až ke konečkům.
   3b) Vlnitý/kudrnatý vzhled: Přiložte styler ke kořínkům vlasů a otočte jím o 180°. Postupujte po celé délce vlasů. Pomocí různých poloh a natočení lze vytvářet různé styly.
3. Postup opakujte, dokud nebudou upravené všechny vlasy.

*v porovnání s ghd gold.
**Technický test v laboratoři na hnědých vlasech, v porovnání s přirozeně usušenými vlasy.

important safety instructions To reduce the risk of burns, electrocution, fire, or injury to persons, read and follow these safety instructions before using your ghd styler. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved, by a person responsible for their safety. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. BURN HAZARD: Keep appliance out of reach from children, particularly during use and during cool down after use. When the appliance is connected to a power supply never leave it unattended. The ghd styler is not suitable for use with synthetic hair. warning: keep away from water Do not use this device in a bathtub, shower, or water filled reservoir. 1. When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off. 2. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electric circuit supplying the bathroom. Ask your installer, or a qualified electrician, for advice. 3. Do not reach for the for the appliance if it has fallen into water. 4. Do not spray or apply wet styling aids directly onto the ghd styler. warning: electricity As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of electrocution: Never operate this appliance if it is not working properly, or if it has a damaged power cord or plug. If the power cord or plug is damaged, it must be replaced by Jemella Ltd. 1.Only use with 110–240V, 50-60 Hz power supply. 2. The appliance should never be left unattended when plugged in. 3.Keep the power cord away from heated surfaces. Do not wrap the power cord around the appliance. Do not hang the ghd styler by the power cord. 4.Always unplug the ghd styler immediately after using. 5.Do not use an extension power cord with this appliance. 6.Do not use a voltage inverter or generator with this appliance. 7.Your ghd product is a class II electrical appliance and should not be connected to an earth connection. warning: hot surfaces The ghd styler heater plates are hot for effective styling. To reduce the risk of burns: 1. NEVER touch the hot styler plates. 2. When not styling always lay the ghd styler on a flat heat-resistant surface such as a ghd styler heat mat. 3. When styling is complete, always switch off the ghd styler and unplug it from the power supply. 4. Wait for the ghd styler to cool before storing. 5. After styling the plates remain hot – for safe cooling cover the plates with the heat proof plate guard. 6. When the ghd styler has cooled, fold the power cord in the same way as it was first delivered in its packaging. Do not wind it around your hand or the body of the ghd styler as this can lead to early failure of the power cord. 7. Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface. Your ghd styler is not only attractive to you, but also to your children. Please ensure you always store your ghd styler out of reach of children, particularly during use, especially when cooling. operation Ensure that hair is completely dry before using the ghd styler. 1. Plug the ghd styler into the power supply 2. And switch on the ghd styler. The ghd styler emits a beep and the switch illuminates with a slow pulsing light to indicate that it is heating up. 3. When it reaches the required temperature the ghd styler emits three beeps and the light changes to be on continuously to indicate that the ghd styler is ready for you to begin styling. The ghd styler has the following safety features: 1. Sleep mode: if the ghd styler has not been used for 30 minutes then for safety the heaters will be turned off and the ghd styler will go into sleep mode, indicated by the light flashing and a warning beep every 10 seconds. a. Note that although the heaters are turned off, the ghd styler is still switched on and connected to the power supply – the ghd styler should be switched off and unplugged at the earliest opportunity. b. To re-start the ghd styler from sleep mode, simply switch the ghd styler off and on again. 2. Fail safe: in the event of a control system error, the light will pulse once and will then go out, the heaters will be turned off, and the ghd styler will emit a rapid beep. You should return the ghd styler to ghd for inspection under the terms of the ghd styler guarantee.