ghd mini Styler med 40 % smalare* plattor är den perfekta plattången för kort hår och lugg.
Med denna hårstyler kan du styla pixieklippningar, bobklippningar eller lugg med precision. Tack vare de extra smala plattorna kan du skapa mångsidiga frisyrer och kreativa looks – med ghd mini kan du enkelt skapa detaljerade vågor, lockar eller raka frisyrer. Få salongliknande resultat och precis styling direkt från hårfästet – även på mycket kort hår från 2 cm.

ghd mini är utrustad med den avancerade Slimline Dual-Zone-tekniken, som konstant övervakar värmen på båda plattorna för att hålla den optimala stylingtemperaturen på 185 °C – för smidiga, släta och friska resultat med upp till 50 % mer glans.**

• EU-kontakt
• Slimline Dual-Zone-teknik
• Universalspänning
• 25 sekunders uppvärmningstid
• 2,7 m lång sladd
• Automatisk viloläge efter 30 minuter utan användning
  
  

*jämfört med ghd gold.
**Teknisk test i laboratorium på brunt hår, jämfört med naturligt torkat hår.

Tillverkarinformation

GHD DEUTSCHLAND GMBH

info@ghdhair.de
https://www.ghdhair.com/de

Ansvarig:

Materialmix

Fyra steg till perfekt stylat hår

1. Spraya ghd bodyguard Heat Protect Spray i håret.
2. Dela upp håret i enskilda sektioner. 3a) Slät look: Placera stylaren vid hårroten och glid jämnt genom hårsektionen ända ner till topparna. 3b) Vågig/lockig look: Placera stylaren vid hårroten och vrid den 180°. Glid nu genom hårsektionen. Genom olika positioner och vridningar kan du skapa mångsidiga frisyrer.
3. Upprepa processen tills hela håret är stylat.
   
   

*jämfört med ghd gold.
**Teknisk test i laboratorium på brunt hår, jämfört med naturligt torkat hår.

important safety instructions To reduce the risk of burns, electrocution, fire, or injury to persons, read and follow these safety instructions before using your ghd styler. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved, by a person responsible for their safety. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. BURN HAZARD: Keep appliance out of reach from children, particularly during use and during cool down after use. When the appliance is connected to a power supply never leave it unattended. The ghd styler is not suitable for use with synthetic hair. warning: keep away from water Do not use this device in a bathtub, shower, or water filled reservoir. 1. When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off. 2. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electric circuit supplying the bathroom. Ask your installer, or a qualified electrician, for advice. 3. Do not reach for the for the appliance if it has fallen into water. 4. Do not spray or apply wet styling aids directly onto the ghd styler. warning: electricity As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of electrocution: Never operate this appliance if it is not working properly, or if it has a damaged power cord or plug. If the power cord or plug is damaged, it must be replaced by Jemella Ltd. 1.Only use with 110–240V, 50-60 Hz power supply. 2. The appliance should never be left unattended when plugged in. 3.Keep the power cord away from heated surfaces. Do not wrap the power cord around the appliance. Do not hang the ghd styler by the power cord. 4.Always unplug the ghd styler immediately after using. 5.Do not use an extension power cord with this appliance. 6.Do not use a voltage inverter or generator with this appliance. 7.Your ghd product is a class II electrical appliance and should not be connected to an earth connection. warning: hot surfaces The ghd styler heater plates are hot for effective styling. To reduce the risk of burns: 1. NEVER touch the hot styler plates. 2. When not styling always lay the ghd styler on a flat heat-resistant surface such as a ghd styler heat mat. 3. When styling is complete, always switch off the ghd styler and unplug it from the power supply. 4. Wait for the ghd styler to cool before storing. 5. After styling the plates remain hot – for safe cooling cover the plates with the heat proof plate guard. 6. When the ghd styler has cooled, fold the power cord in the same way as it was first delivered in its packaging. Do not wind it around your hand or the body of the ghd styler as this can lead to early failure of the power cord. 7. Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface. Your ghd styler is not only attractive to you, but also to your children. Please ensure you always store your ghd styler out of reach of children, particularly during use, especially when cooling. operation Ensure that hair is completely dry before using the ghd styler. 1. Plug the ghd styler into the power supply 2. And switch on the ghd styler. The ghd styler emits a beep and the switch illuminates with a slow pulsing light to indicate that it is heating up. 3. When it reaches the required temperature the ghd styler emits three beeps and the light changes to be on continuously to indicate that the ghd styler is ready for you to begin styling. The ghd styler has the following safety features: 1. Sleep mode: if the ghd styler has not been used for 30 minutes then for safety the heaters will be turned off and the ghd styler will go into sleep mode, indicated by the light flashing and a warning beep every 10 seconds. a. Note that although the heaters are turned off, the ghd styler is still switched on and connected to the power supply – the ghd styler should be switched off and unplugged at the earliest opportunity. b. To re-start the ghd styler from sleep mode, simply switch the ghd styler off and on again. 2. Fail safe: in the event of a control system error, the light will pulse once and will then go out, the heaters will be turned off, and the ghd styler will emit a rapid beep. You should return the ghd styler to ghd for inspection under the terms of the ghd styler guarantee.