• De brede stylingplader og to varmesensorer sikrer hurtig styling med optimal varmefordeling
• Langvarige resultater, ideel til langt, tykt eller krøllet hår
• 80 % mere glans* og op til 2 gange mindre krus*** for resultater som hos frisøren

Oplev den nye ghd max Styler, den professionelle, brede ghd-glattejern med Dual-Zone-teknologi og 70 % større plader*, der garanterer glat og smidigt hår uden ekstrem varme. Den styler langt, tykt og krøllet hår på den halve tid**. Den optimale stylingtemperatur på 185 °C holdes jævnt fra rod til spids, så du opnår førsteklasses resultater uden ekstrem varme. ghd max-glattejernet overbeviser med sine glatte, konturerede stylingplader, der glider ubesværet gennem håret. Det begejstrer desuden med sit slanke design med afrundede kanter, som du kan bruge til at skabe både superglatte frisurer og løse, naturligt udseende bølger.

Takket være en opvarmningstid på kun 30 sekunder og en automatisk dvaletilstand, der automatisk slukker ghd max-styleren efter 30 minutter uden brug, kan den unikke ghd-glattejern til tykt hår bruges hurtigt og sikkert.

Brug ghd max i kombination med ghd straight on - straight & smooth spray for op til 3 gange mindre krus**.

*Sammenlignet med ghd original Styler
** Juli 2020. 80 % af 140 forbrugere er enige, sammenlignet med deres nuværende styler
*** Teknisk test i et laboratorium på krøllet hår sammenlignet med naturligt tørret hår

Produktfunktioner:

• EU-stik
• Dual-Zone-teknologi
• Universalspænding
• 30 sekunders opvarmningstid
• 2,7 m langt kabel
• Automatisk dvaletilstand efter 30 minutter uden brug

Leveringsomfang:

• ghd max Styler sort
• Pladebeskyttelseskappe

Producentdata

GHD DEUTSCHLAND GMBH

info@ghdhair.de
https://www.ghdhair.com/de

Ansvarlig:

Materialmix

important safety instructions To reduce the risk of burns, electrocution, fire, or injury to persons, read and follow these safety instructions before using your ghd styler. This ghd styler is for use only as a hairstyling aid, and only with products specifically designed for use with a heated hairstyling aid such as a ghd heat mat. Handling your ghd styler The ghd styler contains high-tech, sensitive components therefore please ensure that the product is not dropped. Do not insert foreign objects, paint, burn or disassemble your ghd styler. Do not use your ghd styler if it has been damaged – for example if the styler casing is cracked. If your product is damaged through misuse or abuse, this will not be covered under your guarantee. This does not affect your statutory rights. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved, by a person responsible for their safety. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. BURN HAZARD: Keep appliance out of reach from children, particularly during use and during cool down after use. When the appliance is connected to a power supply never leave it unattended. The ghd styler is not suitable for use with synthetic hair. It is possible that colour may permanently transfer onto the styler if used on dyed hair. warning: keep away from water Do not use this device in a bathtub, shower, or water filled reservoir. 1. When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off. 2. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electric circuit supplying the bathroom. Ask your installer, or a qualified electrician, for advice. 3. Do not reach for the for the appliance if it has fallen into water. 4. Do not spray or apply wet styling aids directly onto the ghd styler. warning: electricity As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of electrocution: Never operate this appliance if it is not working properly, or if it has a damaged power cord or plug. If the power cord or plug is damaged, it must be replaced by Jemella Ltd. 1. Only use with 110–240V, 50-60 Hz power supply. 2. The appliance should never be left unattended when plugged in. 3. Keep the power cord away from heated surfaces. Do not wrap the power cord around the appliance. Do not hang the ghd styler by the power cord. 4. Always unplug the ghd styler immediately after using. 5. Do not use an extension power cord with this appliance. 6. Do not use a voltage inverter or generator with this appliance. 7. Your ghd product is a class II electrical appliance and should not be connected to an earth connection. warning: hot surfaces The ghd styler heater plates are hot for effective styling. To reduce the risk of burns: 1. NEVER touch the styler heater plates. 2. Avoid holding or touching the styler beyond the raised finger guard. 3. When not styling always lay the ghd styler on a flat heat-resistant surface such as a ghd styler heat mat. 4. When styling is complete, always switch off the ghd styler and unplug it from the power supply. 5. Wait for the ghd styler to cool before storing. 6. After styling the plates remain hot – for safe cooling cover the plates with the heatproof plate guard. 7. When the ghd styler has cooled, fold the power cord in the same way as it was first delivered in its packaging. Do not wind it around your hand or the body of the ghd styler as this can lead to early failure of the power cord. 8. Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface. Your ghd styler is not only attractive to you, but also to your children. Please ensure you always store your ghd styler out of reach of children, particularly during use, especially when cooling. For safe cooling, cover the plates with the heatproof plate guard. WARNING: even with the plate guard on, the styler heater plates are still very hot, do not touch the plates or allow children or those with reduced physical, sensory or mental capabilities, or lack of experience and knowledge to touch the styler whilst it is cooling. operation Ensure that hair is completely dry before using the ghd appliance. 1. Plug the ghd styler into the power supply. The ghd styler will momentarily flash around the ON/OFF switch and beep to indicate that it is connected to a power supply and is in standby mode. 2. To turn on the ghd styler, press and hold the ON/OFF button for at least 1 second. The ghd styler will play a short start-up tune and a light will pulse to indicate that the styler is heating up. 3. IMPORTANT: the ghd styler reaches the required temperature in seconds, so be careful not to touch the heater plates. Once the ghd styler has reached temperature, it will bleep and the light will remain illuminated to indicate that it is ready to use. 4. When you have finished your styling session, press and hold the ON/OFF button until the ghd styler plays the shut-down tune. Once turned OFF, unplug the ghd styler from the power supply and allow it to cool in a safe place. The ghd styler has the following safety features: 1. Sleep mode: if the ghd styler has been left on and has not been used for more than 30 minutes, a safety feature will automatically turn the styler off. The styler will play the shut-down tune, the heating plates will start to cool and the light will slowly pulse. a. To re-start the ghd styler while it is in sleep mode, simply re-press the ON/OFF button for at least 1 second until the start-up tune sounds. b. Note that although the ghd styler is turned off, it is still connected to the mains and should be unplugged from mains electricity at the earliest opportunity. 2. Protect Mode (ghd Max only): the ghd Max styler can protect itself against adverse events or power fluctuations. For safety the heaters will turn off, the ghd Max styler will emit a bleep and the light will flash white every five seconds. If this occurs un-plug and re-plug at the power supply and then re-start. 3. Fail safe: in the unlikely event of a control system error, for safety the heaters will turn off, the ghd styler will emit rapid bleeps and the light will flash red every 5 seconds. If this occurs switch off the ghd styler at the power supply and re-start. If the unit does not re-start or the problem persists, contact ghd Customer Service for advice.